The Green IC research group in the Department of Electrical and Computer Engineering at the National University of Singapore’s (NUS) Faculty of Engineering invented a novel class of Digital-to-Analog (DAC) and Analog-to-Digital Converters (ADC) that can be entirely designed with a fully-automated digital design methodology, thanks to its fully-digital architecture. Compared to traditional analog architectures and methodologies, the design turnaround time for these novel sensor interfaces is reduced from months to hours. The drastic reduction in the design effort is highly beneficial in cost-sensitive silicon systems, such as sensors for the Internet of Things (IoT). The novel data converter architecture also has very low complexity, reducing the silicon area and hence the manufacturing cost by at least 30 times, compared to conventional designs.
Semiconductors
US Department of Defense to Invest up to $170M in SkyWater’s Domestic Technology Foundry
SkyWater Technology, the innovator’s trusted partner for a competitive edge, announced the US Department of Defense (DOD) is planning to invest up to $170 million for a multi-phase project to enhance microelectronics capabilities for the DoD and the Strategic Radiation Hardened (Rad-Hard) market. SkyWater will be expanding its Trusted Foundry facility to add clean room area and supporting infrastructure to enable this and other complementary technologies. The initial phase is funded at $80 million and SkyWater will leverage this investment to develop a new 90 nm rad-hard electronics production capability to complement its existing 90 nm rad-tolerant offering. In addition, it will fund SkyWater to add copper (Cu) dual-damascene interconnect technology to the facility which marks a significant advancement for the company’s mixed-signal and interposer offerings. Future phases of the effort include options for more advanced microelectronics capabilities.

Wafer Capacity by Feature Size Shows Rapid Growth at <10nm
Leading-edge processes (<28nm) took over as the largest portion in terms of monthly installed capacity available in 2015. By the end of 2019, <28nm capacity is forecast to represent about 49% of the IC industry’s total capacity, based on information in IC Insights’ Global Wafer Capacity 2019-2023 report.
Cadence Custom/AMS Flow Certified for Samsung 5LPE Process Technology
Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that its custom and analog/mixed-signal (AMS) IC design flow has achieved certification for Samsung Foundry’s 5nm Low-Power Early (5LPE) process technology. This certification ensures mutual customers of Cadence and Samsung Foundry have immediate access to a highly automated circuit design, layout, signoff and verification flow needed to design efficiently at 5LPE.
Double Layer of Graphene Helps to Control Spin Currents
Electrons have a negative charge, but they also behave like tiny magnets. This property of electrons, called spin, can be used to transport or store information in electronic circuits. Scientists are looking for ways to create such spin-based electronics, as this is probably more energy efficient than normal electronics. University of Groningen physicist Siddhartha Omar discovered a way to transport spins over long enough distances to make such devices feasible. Furthermore, the material he used enabled him to control these spin currents.
Paving a Way to Achieve Unexplored Semiconductor Nanostructures
Nanowire is a rod-structure with a diameter typically narrower than several hundred nanometers. Due to its size and structure, it exhibits characteristic properties which are not found in larger bulk materials. The study of III-V semiconductor nanowires has attracted much interest in recent decades due to their potential application in nanoscale quantum, photonic, electronic, and energy conversion, and in biological devices, based on their one-dimensional nature and large surface to volume ratio.
IDT Offers Avalanche Technology’s MRAM Devices to Complement its Broad Range of Semiconductor Devices
Integrated Device Technology, Inc. (IDT), a wholly owned subsidiary of Renesas Electronics Corporation (TSE: 6723), today announced that it now offers Avalanche’s magnetic RAM (MRAM) devices to complement the extensive range of power, sensor, timing and microcontroller devices from Renesas. This allows IDT to serve as a single source for all the primary semiconductor devices manufacturers need for industrial control and automation systems, programmable logic controllers, medical diagnostic probes and equipment, multifunction printers, and IoT devices. Avalanche’s MRAM devices are ideal for high-speed, non-volatile memory applications such as program storage and data backup. IDT will offer Avalanche’s 4Mbit, 8Mbit and 16Mbit MRAM devices in two packages (SOIC and WSON) with two different temperature ratings (85°C and 105°C). Available speeds will be up to 108Mhz, with configurable interfaces for SPI, DPI, QPI with Single-Data-Rate and Double-Data-Rate modes.
Reducing Open-Circuit Voltage Loss in Organic Solar Cells
The power conversion efficiencies of organic solar cells (OSCs) based on blends of electron donor…
AKHAN Semiconductor Inc. Partners with Lockheed Martin to Validate Breakthrough Weapons Countermeasure Technology
AKHAN Semiconductor Inc., in collaboration with Lockheed Martin, announced a successful demonstration of a new diamond-based coating technology that will enhance survivability of manned and unmanned military aircraft systems at the AUSA Annual Meeting and Expo. AKHAN Semiconductor Inc. is a technology company specializing in the fabrication and application of electronics-grade diamonds as functional semiconductors. The Illinois-based company has been awarded numerous patents and trademarks for inventions under its Miraj Diamond® Protective Coating platform of products.
GLOBALFOUNDRIES Acquires Smartcom’s PDK Engineering Team to Expand Worldwide Design Enablement Capacity
GLOBALFOUNDRIES® (GF®), the world’s leading specialty foundry, announced today that it has acquired the PDK (Process Design Kit) engineering team from Smartcom Bulgaria AD in Sofia, Bulgaria. The newly acquired team will enhance GF’s scale and capabilities, while strengthening competitiveness of its specialized application solutions to further position the company for growth and value creation.